BTM-01 Bluetooth Phone Adaptor Module by StarCom1 from Motorbike Communications [BTM-01]

Category : Phone Adaptors | Brand : StarCom1

StarCom1 BTM-01 Bluetooth Phone Adaptor Module

StarCom1 BTM-01 Bluetooth Phone Adaptor Module - Click for Larger Image

Product Code : #BTM-01
Best Seller!

$215.00

The StarCom1 Bluetooth module is designed to allow cordless and automatic operation of Bluetooth compatible mobile phones with the StarCom1 unit.

Install the Bluetooth Adaptor with your StarCom1 unit, then leave your Bluetooth enabled phone in your pocket, it will automatically connect each time you get on the bike.

Unit Installation:
The unit must be operated from a switched vehicle 12V DC supply.

The unit is water-resistant but not waterproof so care must be taken to keep it dry.

Care must be taken not to mount the unit near areas which will get hot, for example, near the engine or exhaust.

Also the unit must not be placed close to the ignition system; HT leads coil, alternator, or parts of the bike that could cause electrical interference.

Pairing Your Headset :
You are required to pair the BTM-01 with your mobile phone or other devices before using it.

- Step 1: The BTM01 must be connected to StarCom and powered ON before initiating pairing. To initiate
pairing, press and hold pairing button for 5 seconds until the red indicator of BTM-01 is slowly flashing.

- Step 2: Initiate pairing process of your mobile phone. Refer to the manual of mobile phone for details of the process. You will see a new item "StarCom1" added in your Bluetooth device list after the searching process completes.

- Step 3: You will be asked to enter pin-code to complete pairing, enter 0000 and confirm it. (Note: The 0000 is default pin-code pre-stored in BTM-01.) The red indicator will turn off after pairing completed successfully.

Includes:
1x StarCom1 BTM-01 Bluetooth Phone Adaptor
1x Fitting Kit